PRL Turbo Inlet Pipe for Honda Civic 1.5L L4 FC / FK (2016–2021) Carbon Fiber Complete Kit or Tube Only
PRL Turbo Inlet Pipe for Honda Civic 1.5L L4 FC / FK (2016–2021) Carbon Fiber Complete Kit or Tube Only
Fitment Information
- Honda Civic FC/FK Turbocharged 1.5L L4 10th Generation (2016, 2017, 2018, 2019, 2020, 2021)
- Fits all variants, including Si, 6MT, CVT, RHD, and international models.
- Compatible with all factory-fitment turbochargers.
- Only compatible with PRL Cobra Cold Air Intake or PRL Short Ram Intake.
- Does not fit the OEM airbox.
-
Requires existing PRL inlet hardware (e.g., titanium kit)
Specs & Features
- Increases airflow volume while maintaining air velocity
- Reduces pre-turbo restriction to allow more efficient turbocharger operation
- Cast aluminum inlet piece matches the OEM gasket (50mm ID) and transitions smoothly to 76.2mm OD (74mm ID) carbon tubing
- Inlet/outlet diameter increased from stock 38mm to 45mm
- Multi-piece design for improved fitment and easier installation
- NO ECU calibration required
- Compatible only with PRL Cobra CAI or Short Ram Intake systems
- Cast 6061 Aluminum Inlet Piece
- Thin-Wall Carbon Fiber Tubing
- (2) High-Temp 4-Ply Silicone Couplers
- 304 Stainless Steel Interlocking Worm Clamps
- Injection Molded Evap Purge Fitting
- Buna O-Rings and Supporting Hardware
In the Box
- (1) Cast Aluminum Inlet Piece
- (1) 76mm OD Carbon Fiber Crossover Tube
- (2) 4-Ply Silicone Couplers
- (5) Stainless Interlocking Worm Clamps
- (4) Vacuum Hoses
- (1) Injection Molded EVAP Purge Fitting
- (2) Buna O-Rings
- (1) Bolt
- (1) Wiring Harness Tie-Down
-
(1) 76mm OD Carbon Fiber Inlet Pipe (For Tube Only)
Product Description
Designed for drivers who demand efficiency, precision, and performance, PRL Motorsports' Carbon Fiber Turbocharger Inlet Pipe Kit is the ultimate upgrade for your L15B7-powered Civic. This high-flow kit reduces airflow restriction before the turbocharger and helps your turbo operate more efficiently without needing a tune.
This system was engineered to work with the factory turbo, not around it. The combination of cast and carbon construction prevents heat soak while increasing efficiency. Users can expect improved throttle response and better overall turbo performance across the RPM range, all without throwing off MAF readings or requiring tuning.
By combining a thin-wall carbon fiber crossover pipe with a cast aluminum inlet transition, this system maintains optimal velocity while significantly increasing volume. It’s the perfect balance between airflow and control, tailored specifically to Honda’s 1.5L displacement.
A Lightweight Upgrade for Titanium Inlet Owners
Already running PRL’s Titanium Turbo Inlet Pipe Kit and want the sleek aesthetics and lightweight benefits of carbon fiber? This is the piece for you. The PRL Carbon Fiber Inlet Pipe – Tube Only is designed specifically for customers who want to swap out their titanium crossover pipe for carbon fiber while retaining the rest of the inlet kit.
This is the same high-flow 76mm OD carbon fiber pipe used in our full Carbon Inlet Kit, engineered to maintain performance and velocity without compromise. No tuning or ECU recalibration needed, just a direct replacement for existing PRL inlet setups.
Original: $269.00
-70%$269.00
$80.70
Description
Fitment Information
- Honda Civic FC/FK Turbocharged 1.5L L4 10th Generation (2016, 2017, 2018, 2019, 2020, 2021)
- Fits all variants, including Si, 6MT, CVT, RHD, and international models.
- Compatible with all factory-fitment turbochargers.
- Only compatible with PRL Cobra Cold Air Intake or PRL Short Ram Intake.
- Does not fit the OEM airbox.
-
Requires existing PRL inlet hardware (e.g., titanium kit)
Specs & Features
- Increases airflow volume while maintaining air velocity
- Reduces pre-turbo restriction to allow more efficient turbocharger operation
- Cast aluminum inlet piece matches the OEM gasket (50mm ID) and transitions smoothly to 76.2mm OD (74mm ID) carbon tubing
- Inlet/outlet diameter increased from stock 38mm to 45mm
- Multi-piece design for improved fitment and easier installation
- NO ECU calibration required
- Compatible only with PRL Cobra CAI or Short Ram Intake systems
- Cast 6061 Aluminum Inlet Piece
- Thin-Wall Carbon Fiber Tubing
- (2) High-Temp 4-Ply Silicone Couplers
- 304 Stainless Steel Interlocking Worm Clamps
- Injection Molded Evap Purge Fitting
- Buna O-Rings and Supporting Hardware
In the Box
- (1) Cast Aluminum Inlet Piece
- (1) 76mm OD Carbon Fiber Crossover Tube
- (2) 4-Ply Silicone Couplers
- (5) Stainless Interlocking Worm Clamps
- (4) Vacuum Hoses
- (1) Injection Molded EVAP Purge Fitting
- (2) Buna O-Rings
- (1) Bolt
- (1) Wiring Harness Tie-Down
-
(1) 76mm OD Carbon Fiber Inlet Pipe (For Tube Only)
Product Description
Designed for drivers who demand efficiency, precision, and performance, PRL Motorsports' Carbon Fiber Turbocharger Inlet Pipe Kit is the ultimate upgrade for your L15B7-powered Civic. This high-flow kit reduces airflow restriction before the turbocharger and helps your turbo operate more efficiently without needing a tune.
This system was engineered to work with the factory turbo, not around it. The combination of cast and carbon construction prevents heat soak while increasing efficiency. Users can expect improved throttle response and better overall turbo performance across the RPM range, all without throwing off MAF readings or requiring tuning.
By combining a thin-wall carbon fiber crossover pipe with a cast aluminum inlet transition, this system maintains optimal velocity while significantly increasing volume. It’s the perfect balance between airflow and control, tailored specifically to Honda’s 1.5L displacement.
A Lightweight Upgrade for Titanium Inlet Owners
Already running PRL’s Titanium Turbo Inlet Pipe Kit and want the sleek aesthetics and lightweight benefits of carbon fiber? This is the piece for you. The PRL Carbon Fiber Inlet Pipe – Tube Only is designed specifically for customers who want to swap out their titanium crossover pipe for carbon fiber while retaining the rest of the inlet kit.
This is the same high-flow 76mm OD carbon fiber pipe used in our full Carbon Inlet Kit, engineered to maintain performance and velocity without compromise. No tuning or ECU recalibration needed, just a direct replacement for existing PRL inlet setups.
